#

Dynacord L1300FD-US 2X650W DSP Power Amplifier

Dynacord L1300FD-US 2X650W DSP Power Amplifier

UGS : L1300FD-US Catégories : ,

Rock solid amplifier technology engineered in Germany
Extremely powerful, proven audio performance
Engineered for constant stability at 2 ohms
Sophisticated protection circuitry always protects the amplifiers and connected loudspeakers
High-performance bulletproof voltage handling
On-board DSP includes multi-band PEQs, crossovers, limiters and delay per channel
Intuitive, powerful control software makes configuration and real time control easy — up to 16 amp channels can be controlled and monitored simultaneously
User profiles can be setup to ensure security of the system
Advanced FIR drive to optimize original factory loudspeaker settings yielding a level of unparalleled performance
True channel grouping control with extra DSP capabilities like PEQ, GEQ and delay for each group
L1300FD Specifications
Load Impedance: 2Ω 2.6Ω 4Ω 8Ω
Maximum Output Power, SIngle Channel: 2Ω=1100W; 2.6Ω =950W; 4Ω=660W; 8Ω=350W
Maximum Output Power, Dual Channel: 2Ω=1000W; 2.6Ω =850W; 4Ω=600W; 8Ω=320W
Maximum Output Power, Bridged: 4Ω=2000W; 8Ω=1200W
Maximum RMS Voltage Swing, THD = 1%, 1kHz: 55.3 V
Voltage Gain ref.1kHz: 32.0dB
IMD-SMPTE, 60 Hz, 7 kHz: < 0.1% DIM 30: < 0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21 dBu Crosstalk: < -80dB (ref. 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >104dB
Output Noise , A-weighted: < -68 dBu Output Stage Topology Class: AB Where to buy: Musicredone.com Power Requirement: 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 550 W (⅛ Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Color: Black Height: 88mm (3.46") Width: 483mm (19.02") Depth: 462.4mm (18.2") Weight Net: 12.9kg (28.44 lbs) Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Mains Fuse: 120 V/100 V: T20AH Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion: < 0.05% (at 450 W/4 Ω MBW = 80 kHz, 1 kHz)

1